RON WOODGEARD
08-13-2001, 05:48 PM
HEY GUYS I'LL OFFER THIS STUFF TO YOU BEFORE E-BAY.
I took my 70 C-10 2-wheel pre-runner apart and lowered it 4-6"
1. rancho 9000 shocks + air kit $250.00
2. con-ferr super skid, axle truss 12-bolt chevy rear end $100.00
3. In bed spare carrier, mounts at angle. lockable/removable $80.00
4. energy suspension body mounts
5. 2" body lift spacers-no bolts $35.00
6. stock spindles and everything else on them (I went 2" drop) make offer!
7. factory gas tank, make offer! (still in truck)
8. O.R.I. bed kickers $15.00
9. 3-dick cepek 800 lights, rectangular
10. 2-dick cepek 1000 lights,rectangular (these need bulbs)
11. 2-600 or 700 series (these are round)lights.
12. A cobra hand held C.B. W/250 WATT "BLACK WIDOW" LINEAR AMP. And a pyramid s.w.r. meter. and a 5' fiberglass wound. I believe it's a wilson ant. I have no idea what the amp is worth any more. as those interested in it would know... THEY ARE ILLEGAL TO USE!!!!!and hard to get. I bought the C.B.,ant, and swr meter new. I traded for the amp. I'll check on a price for this stuff if anybody is interested.(a lot of guys are using these in this area)
13.A bolt or weld on 2" frame mount receiver hitch..$50.00
BUYER PAYS ACTUAL SHIPPING COST ON ANY ITEM (I'LL TRY TO DO THE PACKAGING MYSELF)
I can ship straight through FED-X or U.P.S.
I also have a SMITTYBUILT stepside rollbar/lightbar W/extended out legs they run almost to the end of the bed$100.00
A nice front custom built pre-runner bumper W/loop for lights. $100.00
A SMITTYBUILT dual tube rear bumper. this bumper is actually for a small truck but with the stepside, it fit and looked sharp. $75.00
A UNITED fiberglass 4" cowl hood.This is terrible wormanship, I would not buy it for an on road truck. They did not cleanly finish the underside and there is some waves in the glass work, It's fine for a serious off-road truck where "finish" doesn't count. (BUT IF MINE IS A REFLECTION OF THEIR WORKMANSHIP DON'T DO LIKE I DID AND BUY MAIL-ORDER BEFORE CHECKING IT OUT!)
These last four proceeding items are probably to costly to pack/ship so you would have to be close to LAS VEGAS NV. to pick up.+ I had the basic rollbar welded together.(not the outlegs)
AND I know this site is for 67-72 pickups but I also have a 73-? short stepside bed. wood is shot,fenders have a few minor dings, sides are nice, front is nice. and no tailgate.EVERYTHING APPEARS TO BE RUST FREE $150.00
There are parts I need.... Like a NEW inner outer grille(for 70),plastic or metal 21 gal.under bed fuel tank complete(to convert),A clean stepside tailgate and all mounting hardware(I haven't forgotten you WES, I'm trying to make the buck go further.)a new or very clean instrument bezel,a nice stick column.all of the necessary stick linkages,(I'm changing from auto. to stick)a clean, no rust, passenger side, short stepside, bedside (what a mouth full) And I'm contemplating on a hard bed cover/tonno cover. I'm sure there will be more in the near future.
[This message has been edited by RON WOODGEARD (edited 08-13-2001).]
I took my 70 C-10 2-wheel pre-runner apart and lowered it 4-6"
1. rancho 9000 shocks + air kit $250.00
2. con-ferr super skid, axle truss 12-bolt chevy rear end $100.00
3. In bed spare carrier, mounts at angle. lockable/removable $80.00
4. energy suspension body mounts
5. 2" body lift spacers-no bolts $35.00
6. stock spindles and everything else on them (I went 2" drop) make offer!
7. factory gas tank, make offer! (still in truck)
8. O.R.I. bed kickers $15.00
9. 3-dick cepek 800 lights, rectangular
10. 2-dick cepek 1000 lights,rectangular (these need bulbs)
11. 2-600 or 700 series (these are round)lights.
12. A cobra hand held C.B. W/250 WATT "BLACK WIDOW" LINEAR AMP. And a pyramid s.w.r. meter. and a 5' fiberglass wound. I believe it's a wilson ant. I have no idea what the amp is worth any more. as those interested in it would know... THEY ARE ILLEGAL TO USE!!!!!and hard to get. I bought the C.B.,ant, and swr meter new. I traded for the amp. I'll check on a price for this stuff if anybody is interested.(a lot of guys are using these in this area)
13.A bolt or weld on 2" frame mount receiver hitch..$50.00
BUYER PAYS ACTUAL SHIPPING COST ON ANY ITEM (I'LL TRY TO DO THE PACKAGING MYSELF)
I can ship straight through FED-X or U.P.S.
I also have a SMITTYBUILT stepside rollbar/lightbar W/extended out legs they run almost to the end of the bed$100.00
A nice front custom built pre-runner bumper W/loop for lights. $100.00
A SMITTYBUILT dual tube rear bumper. this bumper is actually for a small truck but with the stepside, it fit and looked sharp. $75.00
A UNITED fiberglass 4" cowl hood.This is terrible wormanship, I would not buy it for an on road truck. They did not cleanly finish the underside and there is some waves in the glass work, It's fine for a serious off-road truck where "finish" doesn't count. (BUT IF MINE IS A REFLECTION OF THEIR WORKMANSHIP DON'T DO LIKE I DID AND BUY MAIL-ORDER BEFORE CHECKING IT OUT!)
These last four proceeding items are probably to costly to pack/ship so you would have to be close to LAS VEGAS NV. to pick up.+ I had the basic rollbar welded together.(not the outlegs)
AND I know this site is for 67-72 pickups but I also have a 73-? short stepside bed. wood is shot,fenders have a few minor dings, sides are nice, front is nice. and no tailgate.EVERYTHING APPEARS TO BE RUST FREE $150.00
There are parts I need.... Like a NEW inner outer grille(for 70),plastic or metal 21 gal.under bed fuel tank complete(to convert),A clean stepside tailgate and all mounting hardware(I haven't forgotten you WES, I'm trying to make the buck go further.)a new or very clean instrument bezel,a nice stick column.all of the necessary stick linkages,(I'm changing from auto. to stick)a clean, no rust, passenger side, short stepside, bedside (what a mouth full) And I'm contemplating on a hard bed cover/tonno cover. I'm sure there will be more in the near future.
[This message has been edited by RON WOODGEARD (edited 08-13-2001).]