Replacement rocker install helllppp!!!!!

[crazy4chevs]

Anyone have any info on replacing rockers?

I have new rockers,rocker backing plates,and front and rear floor pannels.

I need info on where the rockers and backing plates meet the floor edge.

The backing plates stick up over the weatherstrip channel. Do i use this, or just the edge thats on the floorpan that curves down to the rocker without the backingplate?

Any info or instruction would help greatly!

[ebfabman]

Most backing plates will have a "lip" on top that needs to be cut off to mate to the floor. Also most floor panels will have the rocker backing on them.

[ksucatz]

look at some of my phots and see if that helps. I am replacing the backing plates. The hole in the plate i had bolt into the upper cab support holes.

I didn't have to cut any lip off the top of my backing plates.

------------------
Brent
------------------------
'68 C10 (http://y42.photos.yahoo.com/bc/ksucatz/lst?.dir=/The+Truck&.src=ph&.order=&.view=t&.done=http%3a//y42.photos.yahoo.com/bc/ksucatz/lst%3f.dir=/The%2bTruck%26.src=ph%26.view=t)
'70 C10
Looking for a Blazer for the wife.

[crazy4chevs]

Thanks guys! http://classicheartbeat.com.westserver.net/ubb/smile.gif It just looked looked like the weatherstrip edge would'nt be supported if i only use the floorpan patch.

I'll check them out again.

KSUCATZ do you have any more pics after the last one thats kinda where im at.

I figure ask ? before i'm beyond the point of no return.

[ksucatz]

Which is the last you looked at?? I was adding photos as I sent that out...I am ready to install the new door jam once I get it, then cab corner and finally the outer rocker!! Then i get to tackle the door. It is rusted through.

------------------
Brent
------------------------
'68 C10 (http://y42.photos.yahoo.com/bc/ksucatz/lst?.dir=/The+Truck&.src=ph&.order=&.view=t&.done=http%3a//y42.photos.yahoo.com/bc/ksucatz/lst%3f.dir=/The%2bTruck%26.src=ph%26.view=t)
'70 C10
Looking for a Blazer for the wife.

[WES]

The edge for the door opening weatherstrip doesn't have any support.... WES www.ClassicHeartbeat.com (http://www.ClassicHeartbeat.com)

[crazy4chevs]

GOT the new pics thanks! Guess I'll go see what i can do.

[crazy4chevs]

Cool thanks wes!