Parts Availability/Interchangeability

[Alan Zayac]

I could use a set of lower control arms for my '69 C10 and am wondering if there are any NOS available. Will any other years fit?

Also, will a 67 or 68 Chevy hood fit the 69 grille without modifications? I like the smoother look of the earlier hoods.

[WES]

There are no NOS ones available, however there are reproduction ones that we cary or all rear control arms from 1960 to 72 I believe are interchangeable. I also have a set of used ones for sale. E-mail me if you are interested. WEHEPP@attbi.com WES www.ClassicHeartbeat.com (http://www.ClassicHeartbeat.com)

[WES]

This is a result of a part search that I did. Parts searched for:
3968697 3968698

Quantity Dealership Contact

* 19 DANS OBSOLETE GMPRTS
CHINOOK, MT 406-357-2977
800-472-4402
* 1 SOUTHSIDE AUTOMOTIVE
MINNEAPOLIS, MN 612-727-2404
None
1 1 MODERN CHEVROLET
WINSTON-SALEM, NC 336-727-4828
800-722-4828

The large numbers are the part numbers and below is a listing of the dealerships that have the parts in stock. Modern Chevrolet is the only one with both of them in stock. Other than that it looks like these were discontinued. Near as I can tell they are not available in reproductions either. WES www.ClassicHeartbeat.com (http://www.ClassicHeartbeat.com)

[stano]

Chevy or GMC C 10 67-70
Chevy or GMC van G10or20 71

Thats what Hollander says.
I looked for front lower control arms.
thank you

------------------
stano
69 C/10

[WES]

The G series 71 has to be drum break style. http://classicheartbeat.com.westserver.net/ubb/smile.gif WES www.ClassicHeartbeat.com (http://www.ClassicHeartbeat.com)

[Chevy2Racr]

I'm interested to knowabout the hoods myself, waht would it take to get a 67-68 hood onto a 69-72 fenders/grill/radiator support?
bryce

------------------
TRUCKS
71 Chevy Custom/10 Deluxe 454 and A/C
71 Custom/10 Step Side 327 saginaw 4spd posi
I got a 70 Short WheelBase frame sitting in the shed too!!
talk to me on AIM/AOL-Chevy2Racr or CutlassCruzier

FROM IOWA!!!! IOWA KICKS @$$ :) near Marshalltown
Drag race at Eddyville
looking for dececnt cab, close to me, with title, perferable A/C e-mail me if ya have one

http://members.aol.com/chevy2racr
~~~~FOR SALE~~~~
83 Z/28 camaro, no motor or transmission-$1000
94 GMC extended cab long box, HD3/4 ton 4X4 9x,xxx miles, Banks power pack, class 3-4 reciever hitch and removeable ball in the bed. Blue and silver, $11,000/offer
TH350 tranny, out of street nova, needs rebuilt, ran well when removed, $200
Warner Borg T-5 from a 3rd gen. camaro, totally rebuilt, like new clutch too $600
406 small block chevy, built. very few passes, was in a72 nova drag car, ran a 6.64 in the 1/8 in a 3200 pound car! $3000/offer
305 small block, out of an 85 camaro Z/28 has a lot of miles, ran when we pulled it, had blow by, the float was stuck in the quadrajet and was flooding it out when we ever we had it started. rebuildable small block $200
Small block chevy parts, intakes cams....ask me, I might have what ya need.

Looking for a 88-98 step side bed also